• 2.png
  • 1.png
  • 3.png
  • WM_gh-spn-120_th_a_e.jpg
  • WM_gh-spn-120_th_b_e.jpg
  • WM_gh-spn-120_th_c_e.jpg
  • WM_gh-spn-120_th_d_e.jpg
  • WM_gh-spn-120_th_e_e.jpg
  • WM_gh-spn-120_th_f_e.jpg
  • WM_gh-spn-120_th_g_e.jpg
  • WM_gh-spn-120_th_h_e.jpg
  • WM_gh-spn-120_th_i_e.jpg
1

Godhand GH-SPN-120 Ultimate Nipper 5.0

Regular price
RM 300.00
Sale price
RM 300.00
Regular price
RM 310.00
Worldwide shipping subject to international guideline | The Hobby Store Malaysia (Unity Studio)
Worldwide shipping subject to international guideline
Secure payments | The Hobby Store Malaysia (Unity Studio)
Secure payments
Authentic products | The Hobby Store Malaysia (Unity Studio)
Authentic products
Flamable shipping subject to IATA guidelines | The Hobby Store Malaysia (Unity Studio)
Flamable shipping subject to IATA guidelines

Precision nipper for plastic only.

Quality display

  • Material: Special tool steels (Kobe Steel, Ltd)
  • Length: about 120mm
  • Weight: about 60g
  • Hardness of the edge: More than HRC58
  • Single- edged structure
  • Blade stopper to prevent chipping
  • Pin for preventing opening excessively
  • Spring structure
  • Original nipper cap is included

Cutting capability

  • Cut plastic only.(polystyrene, polypropylene, acrylonitrile-butadiene-styrene, and PE plastic)
  • Cutting capacity: Limited below 3mm
    *Transparent and semi-transparent PS resin is difficult to cut, so it is limited to under 1mm.

Caution

  1. The nipper is delicate because the goal is to achieve a clean cut. If the nipper is used incorrectly, it may result in chipping and/or breaking.
  2. It has the ability to cut items with very light force, so please do not grip it excessively.
  3. The blade is thinner towards the tip which can be chipped easily. In order to prevent chipping, please cut objects using the middle of the blade.
  4. If twisted, it could cause the blade to break.
  5. Do not cut items that are longer than the blades.
  6. One point of the blade takes a lot of force which could cause chipping and or breaking.
  7. Please do not cut thicker plastic, or materials that are not compatiable with use. (Examples: metal, resin, paper, etc.)
  8. Please do not use for cutting plastic board, tag, parts, and dowel holes.
  9. Remove remains during and after using a toothbrush.
  10. Do not touch the tip of the cutting edge.
  11. The cutting edge is sharp which could cause injuries.
  12. Sebum could cause rusting.
  13. Please wipe off finger prints on the metal parts if touched and apply anti-rust oil on them.
  14. Humidity also causes rusting, so please oil frequently during humid seasons.
  15. Please oil the joint section regulary to prevent the section from getting loose to avoid the decline of the cutting quality.  
  16. Fragments might fly during use.
  17. For your safety, please wear safety glasses.
  18. Please check the safety of your surroundings and that no fragile items are around before use.
  19. Please keep children out of reach.
  20. Put the included nipper cap on after use with caution.


    #godhand #tool #TheHobbyStoreMy